Authors: Tuba Karahan, Tolga Mert, Mustafa Tümer, Zaim Mithat Kerimak

Abstract

In this study, Inconel 625 nickel alloy and UNS 31803 duplex stainless steel (DSS) dissimilar pairs were welded with MIG welding process. Weld metal, obtained with ERNiCrMo-3 filler wire, was subjected to mechanical and microstructural investigations. Notch impact test and micro hardness measurements were realized on weld metal in order to evaluate31803 mechanical properties. Microstructural changes in fusion line of the base metals were examined using optical and electron microscopes. Phase precipitations rich of Ti and Mo elements were detected among dendritic austenite arms in the weld metal. It was observed that ERNiCrMo-3 filler metal had sufficient toughness because of high nickel content.

Key words: Inconel, duplex stainless steel, toughness, hardness, microstructure

DOI: 10.24867/ATM-2019-1-003

Pdf download